Chevrolet C30 1986-79, C35 2000-91, C3500 2000-91, C3500HD 2002-91, C50 1990-88, C5500 Kodiak 1991-90, C60 1990-88, C60 Kodiak 1990, C70 1990-88, C70 Kodiak 1990, G30 1996-79, K30 1986-79, P30 1999-79, P40 1990-83, P60 1990-83, R30 1988-87, R3500 1991-89, V30 1988-87, V3500 1991-89; Dodge W250 1993-90, W350 1993-90; Freightliner MT35 2005-97, MT45 2005-98, MT55 2005-99; GMC C3500 2000-91 1986-79, C3500HD 2002-91, G3500 1996-79, K3500 1986-79, P3500 1999-79, R3500 1991-87, V3500 1991-87
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
Features and Benefits: | Pistons are durable, resistant to cracking or pitting and handle great loads. |
FAQs: | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
Features and Benefits: | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
FAQs: | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations. |
Features and Benefits: | Mounting bracket is included where applicable for a hassle-free installation. |
FAQs: | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
Features and Benefits: | Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish. |
FAQs: | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
Features and Benefits: | New banjo bolts are included where applicable to ensure a perfect fit and quick installation. |
FAQs: | Car pulls to one side during braking. Why? |
Features and Benefits: | New bleeder screws provide trouble-free bleeding and a positive seal. |
FAQs: | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
Features and Benefits: | New washers are included where applicable for a proper seal. |
FAQs: | Brakes squeal all of the time. What's causing the squeal? |
FAQs: | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
Features and Benefits: | A plastic cap plug protects every brake port thread to ensure trouble-free installation. |
Features and Benefits: | New stainless steel hardware clips and new mounting pins are included where applicable. |
FAQs: | Could calipers be the cause of a low brake pedal? |
FAQs: | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
FAQs: | What type of grease is used on floating caliper mounting pins? |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | A silicone grease is used on floating caliper mounting pins. |
FAQs: | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAQs: | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Brake Caliper Finish: | Oil Emulsion |
Piston Quantity: | 1 |
Caliper Color: | Gray |
Installation Hardware Included: | YES |
Package Contents: | Caliper; Hardware Kit |
Bleeder Port Size: | M10x1.5 |
Inlet Port Size: | M10x1.5 |
Piston Material: | Steel |
Piston Size (OD) (in): | 3.368 |
Piston Size (OD) (mm): | 85.5472 |
Pads Included: | NO |
Mounting Bolts Included: | No |
E-Waste: | NO |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082617011921Package Bar Code:00082617011921Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8708309990Country of Origin (Primary):MXEmission Code:Legal USHarmonized Tariff Code (HTS):8708305090Harmonized Tariff Code (Schedule B):8708300050Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:43MSDS Required Flag:NoPallet Layer Maximum:4Remanufactured Part:YesWarranty Distance:24000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:24Warranty Time UOM:Month
Interchange
Chevrolet:14002544Chevrolet:14005770Chevrolet:15601614Chevrolet:15605094Chevrolet:15643132Chevrolet:15665668Dodge:4636588GMC:14002544GMC:14005770GMC:15665668