Buick Centurion 1973-72, Electra 1975-74 1972-71, Estate Wagon 1974-72, LeSabre 1971, Riviera 1971; Cadillac Fleetwood 1978-77; Checker Marathon 1979 1976-74 1972-71, Taxicab 1974; Chevrolet Blazer 1973-72, Brookwood 1971, C10 Pickup 1974-72, C10 Suburban 1978-73, C20 1978-76, C20 Pickup 1973, C20 Suburban 1978-77 1974-73, C30 1978-76, C30 Pickup 1974-72, Caprice 1975 1972-71, G10 1977, G20 1977, G30 1976-75, G30 Van 1974-71, Impala 1975 1971, K5 Blazer 1977 1975, Kingswood 1971, P10 1978 1976, P10 Van 1972, P20 1978-75, P20 Van 1973, P30 1977-75, P30 Van 1974 1972-71, Townsman 1972; GMC C15 1978-77 1975, C15 Suburban 1975, C15/C1500 Pickup 1973-72, C15/C1500 Suburban 1974, C25 1977, C25 Suburban 1977, C25/C2500 Pickup 1973-72, C25/C2500 Suburban 1973-72, C35 1978-75, C35/C3500 Pickup 1974-73 1971, G15 1978-77, G25 1977, G25/G2500 Van 1973-72, G35 1977-76, G35/G3500 Van 1974-72, Jimmy 1976-74 1972, P15 1978 1976-75, P15/P1500 Van 1973-72, P25 1977, P25/P2500 Van 1972, P35 1978-75, P35/P3500 Van 1974-71; Oldsmobile 98 1976 1974 1972-71, Custom Cruiser 1976 1972, Delta 88 1976 1973-72; Pontiac Bonneville 1974 1971, Catalina 1975-74 1971
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
FAQs: | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
Features and Benefits: | An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance. |
FAQs: | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations. |
Features and Benefits: | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
FAQs: | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
Features and Benefits: | Mounting bracket is included where applicable for a hassle-free installation. |
FAQs: | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
FAQs: | Car pulls to one side during braking. Why? |
Features and Benefits: | Pistons are durable, resistant to cracking or pitting and handle great loads. |
Features and Benefits: | New banjo bolts are included where applicable to ensure a perfect fit and quick installation. |
FAQs: | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQs: | Brakes squeal all of the time. What's causing the squeal? |
Features and Benefits: | New bleeder screws provide trouble-free bleeding and a positive seal. |
FAQs: | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
Features and Benefits: | New washers are included where applicable for a proper seal. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
FAQs: | Could calipers be the cause of a low brake pedal? |
FAQs: | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | What type of grease is used on floating caliper mounting pins? |
FAQs: | A silicone grease is used on floating caliper mounting pins. |
FAQs: | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAQs: | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Brake Caliper Finish: | Powder Coated |
Piston Quantity: | 1 |
Caliper Color: | Silver |
Installation Hardware Included: | YES |
Package Contents: | Caliper; Hardware Kit |
Bleeder Port Size: | 3/8x24 |
Inlet Port Size: | 7/16x20 |
Piston Material: | Steel |
Pads Included: | NO |
Mounting Bolts Included: | NO |
E-Waste: | NO |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00884548156739Package Bar Code:00884548156739Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8708309920Country of Origin (Primary):USEmission Code:Legal USHarmonized Tariff Code (HTS):8708305090Harmonized Tariff Code (Schedule B):8708300050Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:43MSDS Required Flag:NoPallet Layer Maximum:3Remanufactured Part:YesWarranty Distance:100000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:120Warranty Time UOM:Month
Interchange
Buick:18005037Cadillac:18005037Chevrolet:18005037GMC:18005037Oldsmobile:18005037Pontiac:18005037