Buick Skylark 1967-64, Special 1967-64; Chevrolet C10 Panel 1967-63, C10 Pickup 1968-63, C10 Suburban 1968-67, C20 Panel 1967, C20 Pickup 1968-63, C20 Suburban 1968-67, C30 Pickup 1968-63, Chevelle 1966-64, Chevy II 1967-63, Corvair 1969-63, El Camino 1966-64, G10 Van 1969-64, G20 Van 1969-67, K10 Pickup 1968-63, K10 Suburban 1968-67, K20 Panel 1967, K20 Pickup 1968-63, K20 Suburban 1968-67, K30 Pickup 1968, Malibu 1966-64, P10 Series 1967-63, P10 Van 1968-67, P20 Series 1967-63, P20 Van 1968, P30 Series 1967-63, P30 Van 1968, Suburban 1966-63; GMC 1000 Series 1965-63, 1500 Series 1965-63, 2500 Series 1963, C15/C1500 Pickup 1968-67, C15/C1500 Suburban 1968-67, C25/C2500 Pickup 1968-67, C25/C2500 Suburban 1968-67, C35/C3500 Pickup 1968-67, G1000 Series 1966-64, G15/G1500 Van 1969-67, G25/G2500 Van 1969-67, I1500 1966, I2500 1966, K15/K1500 Pickup 1968-66, K15/K1500 Suburban 1968-67, K25/K2500 Pickup 1968-67, K25/K2500 Suburban 1968-67, K35/K3500 Pickup 1968, P15/P1500 Van 1968-67, P25/P2500 Van 1968-67, P35/P3500 Van 1968-67, PB1000 Series 1965-63, PB15 Series 1966, PB25 Series 1966, PB2500 Series 1963, Suburban 1966-63; Jeep J-100 1966-63, J-2500 1966-65, Jeepster 1966; Oldsmobile Cutlass 1965-64, F85 1965-64; Pontiac GTO 1967-64, LeMans 1967-64, Tempest 1967-64
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
Features and Benefits: | Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] - Then the final product is tested for each of its functions on the vehicle. |
FAQs: | The wiper motor continues to stop in the middle of the windshield. What's causing this to happen? |
FAQs: | If the motor does not have hidden wiper blades, the most likely cause of parking misalignment is the crank arm position. Adjust the crank arm angle on the motor shaft to park wipers at bottom of windshield. Refer to a vehicle specific service manual or online material for the "hidden park" reset procedure. |
Features and Benefits: | Every motor bearing is re-impregnated or replaced as needed. |
FAQs: | I just installed a new wiper motor and put my old washer pump on and the motor does not work. Is the motor defective? |
Features and Benefits: | Lubrication is applied to the output gear to provide maximum load capacity and long life. |
Features and Benefits: | Weak solder points are 100% reflowed to extend life expectancy |
FAQs: | The motor is NOT defective. There are some wiper motors that will not operate if the washer pump is defective. This may be the cause of the original motor problem. Bench test wiper motor and washer pump before replacing either. |
FAQs: | Why won't the wiper motor work? I have everything hooked up properly. |
Features and Benefits: | Motor magnets are 100% recharged for performance and reliability. |
FAQs: | Check the wiring harness ground, terminal ground lug or ground strap. If the motor still does not operate properly, check the switch and switch circuit. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
FAQs: | How can I determine if my vehicle is equipped with a moisture sensitive wiper motor? |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | Most vehicles equipped with this feature have a rain sensor permanently mounted to the inside of the windshield in front of the rear view mirror. |
FAQs: | How do moisture sensitive wipers work? |
FAQs: | A moisture sensor monitors rainfall accumulation on the windshield and provides input to the windshield wiper motor control module. The windshield wiper control module adjusts the wiper motor speed accordingly. |
Terminal Type: | Blade |
Washer Pump Included: | No |
Mounting Hole Quantity: | 3 |
Mounting Type: | Grommet |
Package Contents: | Wiper Motor; Instruction Sheet |
E-Waste: | YES |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082617039536Package Bar Code:00082617039536Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8501312000Country of Origin (Primary):CNEmission Code:Legal USHarmonized Tariff Code (HTS):8501312000Harmonized Tariff Code (Schedule B):8501312000Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:56MSDS Required Flag:NoPallet Layer Maximum:3Remanufactured Part:YesWarranty Distance:18000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:12Warranty Time UOM:Month
Interchange
Jeep:5045325Jeep:5045326Jeep:5045327Jeep:5045328Jeep:5045329Jeep:5045331Jeep:5045361Jeep:5045363Jeep:5045425Jeep:5045426Jeep:5045427Pontiac:5045325Pontiac:5045326Pontiac:5045327Pontiac:5045328Pontiac:5045329Pontiac:5045331Pontiac:5045361Pontiac:5045363Pontiac:5045425Pontiac:5045426Pontiac:5045427